HDMI switch and multi-viewer switcher. Should I buy a more functional device right away?

You must connect multiple video sources to a TV with only one HDMI input. Switching the HDMI cable is inconvenient and causes wear and tear on the TV connector and its repair. Instead, your best choice is to buy an HDMI switcher. This device usually has several HDMI inputs and one HDMI output. You can switch sources using the buttons on the front panel or with an IR remote control. Some switchers have an RS-232 port for connecting external control systems.

When looking for an HDMI switch in stores, you may find a more advanced device, the multi-switch, which costs a bit more. What is it? Is it a good buy? Let's find out.

HDMI switch. General view

What is an HDMI switch, and how does it work, using the INRIKS SW4031 (analog is Lenkeng LKV301-V2.0) as an example? The device has 3 HDMI inputs for connecting video sources (laptop, TV set-top box, video recorder, etc.) and 1 HDMI output for connecting a monitor / TV / projector. The maximum resolution is 4k@60fps.

The device is shipped in a cardboard box. This is the usual packaging of devices for the professional consumer. Mass-market products are often packaged in boxes with colorful prints.

The Switcher has a compact size. The bottom of the package contains the IR remote control, a 5 V power adapter, and instructions.



All connectors are located on one side. This feature simplifies the wiring organization. In addition to the HDMI ports and the input for the 5V power adapter, there is an RS232 port. This is another attribute of professional orientation. The device can be connected to various control systems. For example, to control audio/video complex with one console, touch screen, or for automation (running some scenarios). This extensive theme is better explored in more detail in a separate article.




The status indicators (on/off, active input) and the input switching button are on the front side.

The remote control has a minimum button count.

The case is made from thick metal and feels very monolithic in the hands. The connectors fit very well. The gaps are minimal.

The soldering of elements and connectors is neat.

HDMI switcher. Performance testing

According to the diagram, we connected three laptops and one monitor to the switch.


We found a delay of several seconds when turning on the first input. The same delay is also present when connecting the laptop to the TV directly. It is explained by the two devices matching, which takes time. The picture quality is excellent.

We see the same delay when we switch to the second and third inputs. When switching back to the first input, we see the same delay again, i.e., the matching process happens repeatedly.

This switching is common to all low-cost HDMI switchers. If the long switching time is unacceptable, you should look for a device with Seamless Switching. This function is necessary to switch between cameras during live broadcasts on the Internet.

You can select the desired input or scroll through all video sources individually with the remote control.

The manual contains a port setting description and switching commands for RS232 control:


HDMI multi-viewer switcher. General view

What is a multi-viewer switcher, and how does it work (using INRIKS SW4041MS (analog is Lenkeng LKV401MS) as an example)?

This device has four HDMI inputs for connecting various video sources (TV set-top box, DVR, laptop, etc.) and one HDMI output for connecting a TV. The maximum resolution is 1080p@60fps.

The SW4041MS multi-switch comes in a similar cardboard box as the regular switch. The package contains the multi-switch, a 12V power adapter, a removable surface mount, and instructions.




Unlike the usual switch, the SW4041MS has HDMI and power cable connectors on both sides. Four HDMI inputs are on the rear side. One HDMI and a DC 12V power input are on the front side. The control buttons and the IR receiver are also on the front side.


Brackets for attaching the multi-switch to different surfaces are included. This is a big plus to the installation possibilities.




The remote control has a large number of buttons for flexible device control.



Multiswitch's housing is made from quality metal. The soldering of elements and connectors is neat.

But we do have a small comment about the location of the capacitors. They clearly tried to fit into a small space. Although this element feature does not affect the performance. We don't have any complaints about other elements.


HDMI multi-viewer switcher. Performance testing

According to the diagram, we connected four video sources and one monitor to the multi-switch.


According to the manual, in addition to the classic switcher function, the device under test has a multi-viewer function - the simultaneous display of one, two, or four video sources on the screen.








We switched inputs and saw instantaneous switching without image crashes or pauses in full-screen mode (classic HDMI switcher). This surprised us. Usually, devices with this ability cost many times more.

However, we quickly found the "price" of a quick switch. We have decided that the video bit rate is reduced. It is a slight distortion of colors. The multi-switch slightly distorts the image. When displaying standard video, the distortion is almost invisible. But if you display the laptop desktop, the distortion becomes more noticeable. For example, dividing lines in some programs, which were barely detectable in the original image, have disappeared.



When testing the multiscreen function, we concluded that you can actually use «Full-screen mode» and «Quad mode – 1».

In other modes, the multi-switch distorts the image.



In addition, we want to draw your attention to sound. In multi-mode, you can separately specify from which source the sound is output. This is very convenient.

Conclusions.

The choice is simple.

Case One.

You want to connect multiple video sources to one TV (projector) and switch between them. It would be best to choose a standard HDMI switcher (e.g., SW4031) without additional functions.

Case Two.

Your task is to display multiple video sources simultaneously without high image quality requirements. For example, to view multiple video recorders at the same time. You can buy a cheap INRIKS SW4041MS multi-viewer switcher. But this device distorts a video image's color and aspect ratio.








Comments

Post a Comment

Popular posts from this blog

LED strip amplifier / LED amplifier / RGB amplifier. Features, problems, choice.

Image
What is the difference between LED strip amplifiers, LED amplifiers, and RGB amplifiers? Only in words and channels. LED strip amplifier is a general definition. An LED amplifier usually refers to a single-channel device that operates with a white light strip. Another name is the DC amplifier. WW LED Amplifier is a dual channel device for warm and cool white light temperature strips. An RGB amplifier is a three-channel device that produces red, green, and blue color strips. The RGBW amplifier is a four-channel device for red, green, and blue color strips, with additional white LEDs. The RGBWW amplifier is a five-channel device for red, green, and blue color strips, with additional warm and cool white LEDs. Why do you need LED amplifiers? Conductors always have resistance. Imagine we want to install an LED strip around a 500-square-foot room (16*32 feet). We need 96 feet of LED strip, and it is impossible (!) to connect it to the power supply at one point (!). Why? For example, a strip
Read more

Finding branches using a reflectometer

Image
  As you know, a data cabling system consists of different segments. To connect them all and bring the data connection to the end user, it is necessary to make a certain number of crossings. Often, staff forgets to disconnect "old" lines. As a result, over time, parallel branches appear, and their presence can have a detrimental effect on the quality of services. BRANCHES AS A SOURCE OF PROBLEMS Parallel branches can make it difficult to serve clients and ensure system functionality. With the introduction of digital systems, the search for parallel branches becomes an increasingly important task since they negatively affect the operation of digital transmission systems and, even if in most cases they are relatively short in length, nevertheless lead to significant problems. The bramch creates a second path for digital signals transmitted on the main line, which travel along the branch and are reflected from its open end. Reflected signals (echoes) enter the main line, where t
Read more
Image
What is a COB LED strip? What’s inside a COB strip?  1. Introduction. LEDs for the LED strip An LED (light-emitting diode) is a semiconductor that emits light by transmitting an electric current. LEDs are made from a silicon crystal (i.e., a chip). LEDs have both advantages and drawbacks. The most important ones are fragility (silicon is a very brittle material) and the inability to sustain temperatures over 200 to 250 °F. The LED chips are protected from mechanical damage by a housing usually made from plastic. This housing also dissipates the heat from the chip to the surrounding objects (e.g., an additional heat sink). The LED chip is placed inside such housing. There are miniature copper conductors inside the housing for the electrical connection of the chip. On the outside of the housing, there are copper conductors that a used to connect the housing to the surface (circuit board, tape, wires, etc.). Enclosures can be different. SMD (Surface Mounted Device) housing technology is t
Read more