Additional features of twisted-pair HDMI extenders: Transmitting the infrared signal


When purchasing a twisted-pair HDMI extender, it is useful to check if it has any additional functions. One of them is the ability to transmit the IR signal. In this article, we will look at the types of IR transmission, and explain what they are needed for and how they are implemented.
Let's look at an example of two extenders: Lenkeng LKV372AE-4.0 and Lenkeng LKV676E (twisted-pair HDMI extenders up to 230 feet)

1. IR signal pass-back

The Lenkeng LKV372AE-4.0 is a simple twisted-pair HDMI extender that has the additional function of sending the IR signal back. This means that we send an HDMI signal from the transmitter to the receiver (i.e. from the TV tuner to the TV) and we can send an IR signal back (i.e. from the TV to the tuner).


In other words, if your TV tuner is in the living room and you want to watch TV in the bedroom, you need to lay a twisted pair from the tuner to the TV in the bedroom. Then connect an HDMI transmitter to the tuner and a receiver to the TV, as in the diagram above.

Now we need to ensure a comfortable switching of the TV tuner channels. To do this, we additionally connect the IR blaster (included with the extension cord) to the HDMI transmitter and attach it to the TV tuner with the included double-sided adhesive tape. Connect the IR receiver (also included in the package) to the HDMI receiver, and attach it with double-sided tape in a convenient place where we will direct the IR remote control. Usually, this is the frame of your TV set.



Now the video signal will be transmitted over twisted pair from the tuner to the TV, and the IR signal will go back from the TV to the tuner.

And this is the principle of IR signal pass-back.

2. Bi-directional IR signal transmission

Bi-directional IR transmission can be explained in the example of the Lenkeng LKV676E twisted-pair HDMI extender

On the body of the transmitter and receiver, you can see two ports to connect the IR: In and Out. Depending on the task we have to use the right input.



If we have already solved the first problem (the IR signal pass-back), then why should we transmit the IR signal from a transmitter to a receiver?


This is more used in commercial applications, e.g. the TV is in the lounge in the cafe, and the TV set is somewhere at the bartender's workplace. The bartender wants to turn off the TV, or switch the input source without going close to the TV set. So with the feature, we are kind of extending the IR remote control signal of the TV over a long distance.



In this way, we get a more versatile transmission of the IR signal in both directions. This does not mean that you have to buy a device with a bi-directional IR signal function. Just think if this scenario is required or not.

Comments

Post a Comment

Popular posts from this blog

HDMI over-IP extenders. Are they all the same? Negative experiences in use

Image
Earlier in the post ( link ), we tested the Lenkeng LKV373 kit and verified that the delay was insignificant - 0.067 seconds. We recently examined the Lenkeng LKV383PRO over-IP extender kit, which upset us. Let's look into what the problem is. What's the difference between a regular twisted-pair HDMI extender and an over-IP 1. Regular twisted-pair HDMI extender. The transmitter and receiver are connected to each other by a single piece of twisted pair (usually 130 to 330 feet). The twisted pair is used exclusively as some transport for specific signals. Video is transmitted in its original quality and without delay in this case. 2. Over-IP HDMI extender. Transmitter and receiver work on IP protocol, which means they can be connected to a local Ethernet network. The transmission range is limited to IP protocol, i.e., 330 feet. The range can be increased if a switch is connected between the transmitter and receiver in the middle. In this case, the video usually shows signs of sli...
Read more

Review, teardown, and testing of LRS-150-24 Mean Well power supply

Image
  The LRS-150-24 power supply can operate from a 100–120 volt or 200–240 volt AC network. The manufacturer states it provides an output current of up to 6.5 amperes at 24 volts. The supply measures 5¾ × 3¾ × 1¼ inches (145 × 95 × 30 millimeters), made on a fiberglass printed circuit board fixed to the base's case. The top cover is perforated in a honeycomb pattern. The case and cover are both made of aluminum. The board is put together neatly, with no visible defects. The components are arranged evenly, and soldering was done with a no-clean flux. Absolutely nothing dangles or rattles in the assembly. No noises of any sort were noticed during the operation of the power supply. The power supply uses a flyback circuit without PFC. The input voltage is supplied to the input node: RF interference filter (1), a pulse surge limiter (varistor), then the voltage goes to the diode bridge (2) and two input electrolytic capacitors (3). The input voltage selector is also located here. Flyback,...
Read more

Reflectometer applications: methods for finding significant cable damage

Image
  The primary and most common damage types are wire casing damages or cable installation errors. These typically are 'floating' defects and wire connection errors. Let's learn the technique of searching for those kinds of faults. AUTOMATIC DEFECT SEARCH Let's start with the automatic search mode. This method automatically compares defects detected on the reflectogram with a threshold value of reverse attenuation. The method of automated comparison with a threshold value greatly simplifies reflectogram viewing. If, for example, you set the threshold to 30 dBRL, the reflectometer will automatically display only the faults with a return attenuation value of 30 dBRL or less. FIXATION OF 'FLOATING' DEFECTS Locating 'floating' defects is another indispensable function of a modern reflectometer. Only with its help can it be possible to point out the locations of the periodically repeating effects of weak wire connections or reduced insulation resistance. Defect...
Read more