Pi Extension board "PiEBridge" adapters

Programmable power supply for external/target devices

The PiEBridge has a built-in programmable power supply for external/target devices. The user can set the voltage of 2.5-5V (accuracy not less than 2%) with a current not more than 300mA by command from SBCs (e.g., Raspberry Pi).

Users can set this programmed voltage or "ground" to any pin of the output connectors using the built-in 3*10 pin matrix and jumpers.


Connectors

The PiEBridge extension board has built-in 6-pin IDC (2x3 0.1") and 10-pin IDC (2x5 0.1") output connectors.
We recommend using four basic adapters to connect to target systems (e.g., for flashing) via these connectors:

IDC6-IDC6

IDC6-TC2030
(TAG CONNECT 6 PINS)


IDC10-IDC10


IDC10-TC2050
(TAG CONNECT 10 PINS)

Analogs in Segger adapters





Comments

Post a Comment

Popular posts from this blog

Shelly RGBW2 controller and Shelly Duo RGBW bulb. Dangerous light pulsations.

Image
I have been interested in smart home systems, automation, and sensors for a long time. I like devices without reference to any manufacturer. So I often use the excellent Shelly Wi-Fi devices. These relays, controllers, and bulbs have an open embedded web server and are controlled via MQTT or web API. I recently made new lighting in my home lab. I used a Shelly RGBW2 controller (24 volts) for the bright white LED strip (main light) and Shelly Duo RGBW GU10 bulbs (background light). I immediately noticed discomfort in my eyes, and by evening my eyes were watery. I thought I had pinkeye, or the air in my room was dehydrated, or the street air was suddenly polluted. I agonized for two days. On the third day, I experimented with LEDs and a spectrometer for one of my future posts. I was getting extraordinary results. During one of the experiments, I pointed the spectrometer at my illuminating LED strip in the lab for comparison with samples. Bingo! I saw a scary pattern of light ripples. I a...
Read more

Review, teardown, and testing of LRS-150-24 Mean Well power supply

Image
  The LRS-150-24 power supply can operate from a 100–120 volt or 200–240 volt AC network. The manufacturer states it provides an output current of up to 6.5 amperes at 24 volts. The supply measures 5¾ × 3¾ × 1¼ inches (145 × 95 × 30 millimeters), made on a fiberglass printed circuit board fixed to the base's case. The top cover is perforated in a honeycomb pattern. The case and cover are both made of aluminum. The board is put together neatly, with no visible defects. The components are arranged evenly, and soldering was done with a no-clean flux. Absolutely nothing dangles or rattles in the assembly. No noises of any sort were noticed during the operation of the power supply. The power supply uses a flyback circuit without PFC. The input voltage is supplied to the input node: RF interference filter (1), a pulse surge limiter (varistor), then the voltage goes to the diode bridge (2) and two input electrolytic capacitors (3). The input voltage selector is also located here. Flyback,...
Read more

IKEA TRADFRI Driver for wireless control 603.426.61 (Intertec ICPSLC24-30NA)

Image
  At first sight The power supply is based on the MP023 chip. It is a one-cycle DC-DC controller created by Monolithic Power Systems in 2016. Schematic: Input → filter → bridge rectifier  → flyback converter with rectifier working for the output C-filter. From the converter output, the voltage comes to the PWM modulator unit based on the Silicon Labs EFR32 "Wireless Gecko" module. Luminaires are connected to the modulator output via the output connector. The marking on the power supply case: λ>0.8, and the coefficient value hints at a passive corrector. The radio elements are assembled neatly. The circuit board has no electrical defects, and the connection quality is good everywhere. Test results • The pulsation value as a fraction means that the voltage has pronounced HF (numerator) and LF (denominator) components. • The hottest component in the power supply is the output rectifier diode. The measurement is taken with the cover removed. • The overcurrent protection is tri...
Read more